DELTA Servo Drive ASD-B2-0721-B

Servo drive from the ASD-B2 series, 750w AC Servo Drive, offering reliable performance and precision in medium-scale applications.

Brand Delta
Model Number ASD-B2-0721-B
State In stock
Condition New Original
Warranty 12 months


Global Assurance

Model: ASD-B2 Series 100W 200W 400W 750W 1kW 1.5kW 2kW 3kW
01 02 04 07 10 15 20 30
Torque Control Mode    Analog Input Command   Voltage Range 0 ~ ±10 VDC
Input Resistance 10KW
Time Constant 2.2 us
Command Source External analog signal / Internal parameters
Smoothing Strategy Low-pass filter
Speed Limit Operation Parameter Setting or via Analog input
Analog Monitor Output Monitor signal can set by parameters (Output voltage range: ±8V)
           Digital Inputs/Outputs        Inputs Servo On, Reset, Gain switching, Pulse clear, Zero speed CLAMP, Command input reverse control, Speed/Torque limit enabled, Speed command selection, Position / Speed mode switching, Speed  / Torque mode switching, Torque / Position mode switching, Emergency stop, Forward / Reverse inhibit limit, Forward / Reverse operation torque limit, Forward / Reverse JOG input, Electronic gear ratio (Numerator) selection and Pulse inhibit input
     Outputs   Encoder signal output (A, B, Z Line Driver / Z Open collector)
Servo ready, Servo On, At Zero speed, At Speed reached, At Positioning completed, At Torques limit, Servo alarm (Servo fault) activated, Electromagnetic brake control, Output overload warning, Servo warning activated
       Protective Functions Overcurrent, Overvoltage, Undervoltage, Motor overheated, Overload, Overspeed, Excessive deviation, Regeneration error, Abnormal pulse control command, Encoder error, Adjustment error, Emergency stop activated, Reverse/ Forward limit switch error, IGBT temperature error, Serial communication error, Input power phase loss, Serial communication time out, terminals with short circuit protection (U, V ,W , CN1, CN2, CN3 terminals)
Communication Interface RS-232/RS-485
Environment Installation Site Indoor location (free from direct sunlight), no corrosive liquid and gas (far away from oil mist, flammable gas, dust)
Altitude Altitude 1000m or lower above sea level
Atmospheric pressure 86kPa to 106kPa
Operating Temperature 0oC to 55oC (32°F to 131°F) (If operating temperature is above specified range, forced cooling will be required)
Storage Temperature -20℃ ~ 65℃
Humidity 0 to 90% (non-condensing)
Vibration 2 2  9.80665m/s (1G) less than 20Hz, 5.88m/ s (0.6G) 20 to 50Hz
IP Rating IP20
Power System TN System *4
     Standards/Requirement    IEC/EN 61800-5-1, UL 508C  

Get Started Today!


Embark on a journey of seamless procurement with us. If you’re seeking a product quote or require any additional support, our team is here to guide you every step of the way.

Fill out this form to start a conversation tailored to your specific needs. We understand the value of your project and time.

Rest assured, your email information remains strictly confidential with us. Let’s collaborate to enhance your operations today.

Ask For Quote Now!

Ask For A Quick Quote

*we respect your confidentiality and all information are protected.