Mitsubishi MR-JE Series 1kw Servo Drive MR-JE-100A

Servo drive from the MR-JE series, AC motion servo drive/amplifier with built-in dynamic brake + built-in regenerative resistor, ensuring smooth and efficient motion control in medium to large-scale applications.

Brand Mitsubishi
Model Number MR-JE-100A
State In stock
Condition New Original
Warranty 12 months

Categories

Global Assurance

100-new-original
12-months-warranty
worldwide-shipping
Mitsubishi Servo amplifier model MR-JE-A 10A 20A 40A 70A 100A 200A 300A
Output Rated voltage 3-phase 170 V AC
Rated current[A] 1.1 1.5 2.8 5.8 6.0 11.0 11.0
  Voltage/frequency (Note 1) 3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz 3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz (Note 9) 3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
Rated current (Note 7)[A] 0.9 1.5 2.6 3.8 5.0 10.5 14.0
Permissible voltage fluctuation 3-phase or 1-phase 170 V AC to 264 V AC 3-phase or 1-phase 170 V AC to 264 V AC (Note 9) 3-phase 170 V AC to 264 V AC
Permissible frequency fluctuation ±5% maximum
Interface power supply 24 V DC ± 10% (required current capacity: 0.3 A)
Control method Sine-wave PWM control/current control method
Tolerable regenerative power of the built-in regenerative resistor (Note 2, 3)[W] 10 20 20 100 100
Dynamic brake Built-in (Note 4, 8)
Communication function USB: Connect a personal computer (MR Configurator2 compatible) RS-422/RS-485 (Note 10): Connect a controller (1 : n communication up to 32 axes) (Note 6)
Encoder output pulse Compatible (A/B/Z-phase pulse)
Analog monitor 2 channels
  Maximum input pulse frequency 4 Mpulses/s (when using differential receiver), 200 kpulses/s (when using open-collector)
Positioning feedback pulse Encoder resolution: 131072 pulses/rev
Command pulse multiplying factor Electronic gear A/B multiple, A: 1 to 16777215, B: 1 to 16777215, 1/10 < A/B < 4000
Positioning complete width setting 0 pulse to ±65535 pulses (command pulse unit)
Error excessive ±3 rotations
Torque limit Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Speed control mode  Speed control range Analog speed command 1:2000, internal speed command 1:5000
Analog speed command input 0 V DC to ±10 V DC/rated speed (Speed at 10 V is changeable with [Pr. PC12].)
Speed fluctuation rate ±0.01% maximum (load fluctuation 0% to 100%), 0% (power fluctuation: ±10%) ±0.2% maximum (ambient temperature: 25℃ ± 10 ℃) only when using analog speed command
Torque limit Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
  Analog torque command input 0 V DC to ±8 V DC/maximum torque (input impedance: 10 kΩ to 12 kΩ)
Speed limit Set by parameters or external analog input (0 V DC to ± 10 V DC/rated speed)
Positioning mode Point table method, program method
Servo function Advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function, power monitoring function
Protective functions Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection
Compliance to global standards Refer to “Conformity with global standards and regulations” in the catalog.
Structure (IP rating) Natural cooling, open (IP20) Force cooling, open (IP20)
  3-phase power supply input Possible
1-phase power supply input Possible Not possible
  Ambient temperature Operation: 0 ℃ to 55 ℃ (non-freezing), storage: -20 ℃ to 65 ℃ (non-freezing)
Ambient humidity Operation/Storage: 90 %RH maximum (non-condensing)
Ambience Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
Altitude 1000 m or less above sea level
Vibration resistance 5.9 m/s2 at 10 Hz to 55 Hz (directions of X, Y and Z axes)
Mass[kg] 0.8 0.8 0.8 1.5 1.5 2.1 2.1

Get Started Today!

UNLOCK EFFICIENT SOLUTIONS – SUBMIT YOUR REQUEST FOR IMMEDIATE ASSISTANCE.

Embark on a journey of seamless procurement with us. If you’re seeking a product quote or require any additional support, our team is here to guide you every step of the way.

Fill out this form to start a conversation tailored to your specific needs. We understand the value of your project and time.

Rest assured, your email information remains strictly confidential with us. Let’s collaborate to enhance your operations today.

Ask For Quote Now!

Ask For A Quick Quote

*we respect your confidentiality and all information are protected.