[gtranslate]

Omron XW2R-J34GD-C2 Fast PLC Conversion Unit In Stock

Connector terminal block conversion unit, 34-pin MIL connector, M3 screw terminal, surface mounting/DIN track mounting.

* Need more details? Our team is ready to help – just ask!

Key Features and Technical Specifications

This connector block simplifies the connection between your PLC I/O units and external devices. It saves you time, reduces errors, and makes your control panel look clean and professional.

It offers a direct and reliable link, turning complex wiring jobs into a simple plug-and-play task. We have a large number of new original stocks, which can support global delivery within 24 hours.

AttributeSpecification
Product NameConnector Terminal Block Conversion Unit
ModelXW2R-J34GD-C2
ManufacturerOmron
PLC-Side Connector Type34-pin MIL Connector (e.g., XG4A-3434)
Terminal Block TypeM3 screw terminal
Mounting MethodSurface Mounting, DIN Track Mounting
Rated Current1 A
Rated Voltage125 VAC, 125 VDC
Compatible ProductsSysmac CJ1 Series, CS1 Series, see datasheet for full list.

Effortless Connection for Sysmac CJ1 Series

The XW2R-J34GD-C2 uses a standard connector type. This makes the link to your PLC I/O simple and strong. The design helps you avoid mistakes. A good contact gives you a system you can trust.

Simplify Wiring with a Block Conversion Unit

Wiring a control panel can take a lot of time. Each wire must be cut, stripped, and put in the right terminal. The XW2R block conversion unit changes all that. It takes a multi-pin connector and turns it into an easy-to-use screw terminal block. This makes your wiring clean and fast.

Flexible Mounting for Any Panel

Every control panel is different. You need parts that can fit anywhere. This Omron conversion unit offers two ways to mount it. You can use surface mounting directly on the panel. Or, you can clip it onto a standard DIN rail. This choice gives you great freedom in your panel design.

Omron XW2R-J34GD-C2 Product Datasheet

Frequently Asked Questions

The XW2R-J34GD-C2 is a connector terminal block conversion unit. Its main job is to provide a simple and reliable connection between an Omron PLC I/O module and field wiring.

While it is designed for the Sysmac CJ1 series, it may be compatible with other Omron series that use the same 34-pin connector. Always check the product datasheet for a full compatibility list.

This product is very flexible. You can mount it directly onto a flat surface (surface mounting) or snap it onto a standard DIN rail inside your control panel.

The M3 screw terminals are designed for common wire sizes used in control panels. Please refer to the official 3D model and datasheet for exact wire gauge specifications to ensure a secure contact.

Ask For A Quick Quote

*we respect your confidentiality and all information are protected.