Mitsubishi MR-J2S-40A Servo Amplifier
A 400 W, 200 V-class servo drive for position, speed and torque control. The A-series general-purpose interface accepts pulse-train position commands and analog speed or torque commands.
Request a quote by email
Usually quoted within 24 hours. Price and lead time confirmed by email.
We use your details to respond to this inquiry. Privacy policy ↗
MR-J2S-40A specifications
| Manufacturer / Series | Mitsubishi Electric / MELSERVO-J2-Super |
|---|---|
| Model | MR-J2S-40A |
| Capacity | 0.4 kW (400 W) |
| Amplifier Interface | A series, general-purpose command interface |
| Main Circuit Supply | 200 V class; three-phase 200–230 VAC or single-phase 230 VAC, per the instruction manual |
| Control Modes | Position, speed and torque |
| Position Command | Pulse train from a compatible positioning controller |
| Speed / Torque Command | Analog command inputs available |
| Matched Motor Examples | HC-KFS43 and HC-UFS43; check complete motor designation |
| Condition | New original product |
| Warranty | 12-month KWOCO warranty |
Match the replacement to the existing axis
Start with the controller connection
For a positioning axis, check the pulse output type on the controller and the pulse format configured in the amplifier. For a speed- or torque-controlled axis, record the command source and scaling. These settings determine how the axis responds to the controller.
Identify the complete motor assembly
Use the motor series, capacity and suffix to locate its amplifier combination. If the motor has a holding brake or gearbox, include that designation when checking cables and the mechanical installation.
Manufacturer references: MR-J2S-A instruction manual (PDF) ↗ · Servo amplifier and motor catalogue (PDF) ↗
Frequently asked questions
Can MR-J2S-40A replace MR-J2S-40B?
The B model uses the SSCNET controller interface. Check how the machine controller sends commands before choosing a drive. Matching the 400 W rating alone does not establish interchangeability.
What changes if the label reads MR-J2S-40A1?
The final 1 identifies the single-phase 100–120 VAC supply version. For a replacement, read the full amplifier model and the machine supply voltage before ordering.
Can I reuse my existing 400 W servo motor?
Look up the complete motor model in the amplifier–motor combination table. HC-KFS43 is a listed example. Also check brake configuration, encoder cable and motor power cable against the installed axis.
Which settings should I record before replacing the amplifier?
Save the existing parameters if the amplifier is accessible. Record the control mode and command settings. For a positioning axis, also record pulse format, electronic gearing and machine reference settings so they can be checked during commissioning.
Have Questions or Need a Quick Quote?
✓ New original products only
✓ 12-month warranty for all products
✓ Fast delivery to the USA, Europe and worldwide
