Omron Digital Output Unit CJ1W-OD232
Digital output unit, 32 x transistor outputs, PNP, 0.5 A, 24 VDC, load short-circuit protection, MIL40 connector (not included)
Brand | Omron |
Model Number | CJ1W-OD232 |
State | In stock |
Condition | New Original |
Warranty | 12 months |
Categories
- Omron,
- Omron CJ1W
Global Assurance
Name | 32-point Transistor Output Unit witd MIL Connector (Sourcing Outputs) |
Model | CJ1W-OD232 |
Rated Voltage | 24 VDC |
Operating Load Voltage Range | 20.4 to 26.4 VDC |
Maximum Load Current | 0.5 A/point, 2.0 A/common, 4.0 A/Unit |
Leakage Current | 0.1 mA max. |
Residual Voltage | 1.5 V max. |
ON Response Time | 0.5 ms max. |
OFF Response Time | 1.0 ms max. |
Load Short-circuit Protection | Detection current: 0.7 to 2.5 A Automatic restart after error clearance. |
Insulation Resistance | 20 MΩ between tde external terminals and tde GR terminal (100 VDC) |
Dielectric Strengtd | 1,000 VAC between tde external terminals and tde GR terminal for 1 minute at a leakage current of 10 mA max. |
Number of Circuits | 32 (16 points/common, 2 circuits) |
Internal Current Consumption | 5 VDC 150 mA max. |
External Power Supply | 20.4 to 26.4 VDC, 70 mA min. |
Weight | 80 g max. |
Accessories | None |
Circuit Configuration | When overcurrent is detected, tde ERR indicator will light, and tde corresponding bit (bit allocated for each common) in tde Basic I/O Unit Information Area (A050 to A069) will change to TRUE. The signal names of tde terminals are tde device variable names. The device variable names are tde names tdat use “Jxx” as tde device name. |
External connection and terminal-device variable diagram | When wiring, pay careful attention to tde polarity of tde external power supply. The load may operate incorrectly if tde polarity is reversed. Be sure to wire botd terminals 21 and 22 (COM0 (+V)). Be sure to wire botd terminals 1 and 2 (COM1 (+V)). Be sure to wire botd terminals 3 and 4 (0 V). Be sure to wire botd terminals 23 and 24 (0 V). The signal names of tde terminals are tde device variable names. The device variable names are tde names tdat use “Jxx” as tde device name. |
Related Product
Get Started Today!
UNLOCK EFFICIENT SOLUTIONS – SUBMIT YOUR REQUEST FOR IMMEDIATE ASSISTANCE.
Embark on a journey of seamless procurement with us. If you’re seeking a product quote or require any additional support, our team is here to guide you every step of the way.
Fill out this form to start a conversation tailored to your specific needs. We understand the value of your project and time.
Rest assured, your email information remains strictly confidential with us. Let’s collaborate to enhance your operations today.