Omron E3Z-D61 vs E3Z-D81: What to Verify Before Ordering a Replacement

kwoco-plc.com

Suppose the sensor on your machine reads E3Z-D61 2M, but the quotation comes back E3Z-D81 2M. The voltage, sensing distance and cable length all match. Should you accept it?

For a straight replacement, ask the supplier to quote the D61. The D61 has an NPN output, which pulls the signal toward 0 V when it switches on. The D81 has a PNP output, which drives the signal toward the positive supply. The D81 will fit the same space and can detect the same part, yet the PLC input may stay off. Approve that change only after someone has checked the input circuit on the machine. Omron E3Z-D61 2M · Omron E3Z-D81 2M

Which PLC terminal does the black wire reach?

If the old sensor worked and its full part number is legible, a like-for-like order is straightforward. The wiring drawing becomes important when the label is damaged, the spare-parts list gives both numbers, or a supplier offers one in place of the other.

Find the numbered input where the black signal wire terminates. Then find the common for that particular group of inputs. On a conventional DC input module, the arrangement looks like this:

Installed input circuit	Sensor that suits it
The group common is wired to field positive. Current flows through the PLC input and returns to 0 V through the sensor.	E3Z-D61, NPN
The group common is wired to 0 V. The sensor supplies current to the PLC input.	E3Z-D81, PNP

Use the terminal drawing for the installed module. A description such as “24 VDC inputs” tells purchasing the voltage but leaves the current path unanswered. There’s a further catch with a card described as wastafel/sumber: several channels can share one common. If three neighboring sensors use that common, changing its polarity to accommodate a fourth sensor changes the circuit for all four. Omron E3Z output circuits, p. 11 · AutomationDirect guide to shared input commons

Butuh Penggantian Drive Altivar?

Telusuri hard drive Altivar asli terbaru untuk proyek pemeliharaan, pemecahan masalah, dan penggantian.

Ask for a photo of the cable end

A label photo settles the output question. A second photo, taken where the sensor cable meets the machine wiring, can prevent a different ordering mistake.

Take E3Z-D81-M3J 0.3M. It has the same PNP output as E3Z-D81 2M, but the first unit has a short lead ending in a four-pin M8 plug. The second has an integral two-metre cable. If the existing sensor unplugs beside the bracket, the technician expects to reuse the mating cordset. A sensor supplied with two metres of plain cable changes that job. Omron E3Z-D81-M3J 0.3M · Omron E3Z-D81 2M

For a cable that runs all the way to a junction box, measure the installed route. Include the drop into the tray, the turn through the gland and enough length to reach the terminal. Omron lists an E3Z-D61 5M as well as the 2 m version. Dropping the length from a stock description can leave the installer with the correct sensor and a lead that ends halfway along the tray. Omron E3Z-D61 5M

Temukan PLC yang Tepat untuk Sistem Anda

Jelajahi CPU PLC, modul I/O, catu daya, dan unit komunikasi orisinal baru untuk proyek pemeliharaan dan otomatisasi.

When the 100 mm rating deserves a closer look

Both sensors detect light reflected from the product. Omron gives the 100 mm sensing distance against a 100 × 100 mm white paper target. That detail matters if the replacement request came in after a packaging change. A narrow black pack passing at 90 mm presents a different optical target from the white carton the machine ran last week. Before buying another sensor, have maintenance try the new pack at its normal distance and angle, then check that the output clears when the gap behind it comes into view. Omron E3Z standard-model specifications

A supplier may also offer an E3Z-D82 because it has a PNP output and more reach. Omron lists it as a 1 m diffuse model. On a conveyor with a metal guide behind the product, that extra reach gives the installer another surface to account for. If a D82 is under consideration, the acceptance test needs both the smallest product and an empty stretch of conveyor with the guide in place.

Tingkatkan atau Ganti HMI Anda

Temukan panel HMI yang kompatibel untuk model yang sudah tidak diproduksi, peningkatan mesin, dan penggantian antarmuka operator.

Pertanyaan yang Sering Diajukan

Can I change a D81 to NPN using the Light-ON/Dark-ON switch?

No. That switch selects whether the output turns on when the sensor receives enough light or when the received light falls below the switching threshold. The D81 sources current in either position. When ordering a spare, record the output type on the purchase order and the L/D position in the setup notes.

Can I identify a D61 or D81 from the brown, blue and black wires?

No. Both standard pre-wired models use brown for supply positive, blue for 0 V and black for the output. If the marking has rubbed off, use the machine drawing and the input-group common to establish which output the machine requires. You’ll still need to identify the cable length and any special version separately.

The old sensor has an M8 socket on its body. Which models should I look up?

For this 100 mm diffuse-reflective pair, Omron lists E3Z-D66 as the standard M8 connector model with NPN output and E3Z-D86 as its PNP counterpart. Compare the proposed part with the installed connector. A socket on the sensor body and a plug on a short pigtail put the cable joint in different places, which can matter behind a guard.

Do I need a reflector on the purchase order?

The D61 and D81 use the product itself to return light to the sensor. If the machine has a dedicated reflector directly opposite the lens, take another look at the old label. E3Z-R61 and E3Z-R81 are retro-reflective models. That single letter changes which sensor belongs on the order.

What can receiving check before the machine is available?

Match the delivered code to the order, inspect the actual cable termination and account for any accessories listed separately. Leave the functional check for installation. With the machine in its approved test state, maintenance should see the intended PLC input change as a representative part enters the sensing position and change back when the part clears. That last observation matters on a counting station: the first carton can register correctly even if the input stays on through the gap before the second.

Dukung proyek Anda dengan Sensor Omron, Keyence, Schneider baru dan asli – tersedia sekarang!

Put the complete code on the order

For a machine documented with the standard two-metre NPN unit, one line is enough:

Omron E3Z-D61 2M — NPN diffuse-reflective photoelectric sensor with integral 2 m cable. Quote the full manufacturer part number for any proposed substitute.

Copy every suffix from the installed label. If it reads E3Z-D61K, for instance, keep the Bahasa Inggris: K on the requisition. Omron lists the D61K and D81K in its oil-resistant range. Also specify any mounting bracket or mating cable you need as a separate item so the supplier can confirm what is included.

If a quote still leaves room for interpretation, send Kwoco the label photo and the cable-end photo with one specific question, such as “Does the quoted unit have the same four-pin plug as the one shown here?” That gives the buyer a written answer to check against the delivery. Hubungi Kwoco

Hubungi kami

Cukup isi nama, alamat email, dan deskripsi singkat pertanyaan Anda dalam formulir ini. Kami akan menghubungi Anda dalam waktu 24 jam.

Kategori Produk

Produk Penjualan Panas

Unit CPU Omron CJ2M-CPU32

Pemasok Omron PLC CJ1W-PA202 di Cina

Penggerak Servo Mitsubishi MR-JE Seri 400w MR-JE-40A

Butuh Pertandingan Cepat?

Bagikan model atau spesifikasi Anda dan tim kami akan membantu Anda menemukan solusi yang tepat dengan cepat.

Anda Mungkin Juga Menemukan Topik Ini Menarik

Omron E3Z-D61 vs E3Z-D81: What to Verify Before Ordering a Replacement

Daftar isi